3G & APP
How to use Android App Brickcom Monitor to view Brickcom IP Camera?
Follow the steps below to get the video streaming on Android Phone.
Go to the Video Configuration page and configure the stream setting as the parameters below.
Video codec as H.264 for stream1
Resolution as 800*600 or lower
Frame Rate as 25 fps or lower
Quality as 3 or lower
The Video settings of 3GPP will need to be configured depends on the bandwidth of your network environment. The configuration is just for the reference.
Go to the HTTP/HTTPS Configuration page and configure the HTTP port, e.g. 8100.
Step3. Configure the Port Forwarding rule in Router. Add the port 8100 to IP Camera’s IP Address.
Step4. Connect Android Phone to Internet, via 3G or Wi-Fi. Download and install the Brickcom Monitor.
Step5. Launch Brickcom Monitor
and Press “Menu” the 3 points at button of the screen then click on “Settings”
Step 6. Click on Add Profile to add the camera to the list.
Step7. Edit the IP Camera information as below and tick enable then click Apply
IP Address/URL: Router’s WAN IP Address
HTTP Port: port number (e.g. 8100)
Step7. After click Apply then click return on your phone.
Step8. Playing video streaming by Brickcom Monitor .